Clear Across Kansas

Category Archives: Digital


The all-new 443.850+ McPherson repeater is on the air! McPherson county hams can now enjoy a local repeater that offers DMR with Brandmeister networking, System Fusion with YSFReflector networking, and P25 with it’s associated reflectors. Sorry, folks, there is no Read more…


2017: Year In Review As we prepare to enter a new year, I thought about taking a moment to look back at the major accomplishments and additions to the K-Link network during 2017. Our first Allstar node was commissioned at Read more…


A new page was created to describe how to use the KansasLink C4FM/DMR conference. See it at: US-KansasLink Digital Conference 73, Justin, NV8Q


The all-new 147.225+ (162.2) Minneapolis repeater is on the air! The addition of this repeater gives wide-area two-meter access to K-Link in Ottawa and Saline counties for the first time, and also covers Lincoln and much of Mitchell and Ellsworth Read more…


Since the addition of the MMDVM repeater on 444.750 near Minneapolis, which acts as a repeater and network node for Yaesu System Fusion and DMR radios, I’ve been asked what my thoughts are for a good radio to “get your Read more…


The Minneapolis 444.900 444.750 repeater, which has been a Yaesu System Fusion repeater for the past few months, has been retrofitted with an MMDVM modem which adds D-Star, DMR, and P25 capabilities to the repeater in addition to Fusion (YSF). Current Read more…


A new System Fusion repeater was installed at the Minneapolis site this weekend. This new repeater is on 444.900, digital only, and has Wires-X. Normally this node will be connected to the Kansas-City room but can be connected to any Read more…


The Ellsworth 444.775+ (162.2) repeater was upgraded to a new Yaesu DR-1X repeater today. This is the third DR-1X deployed on the K-Link network and the 22nd DR-1X in Kansas configured for digital use. This repeater is much more sensitive Read more…


Thank you to everyone who donated funds for K-Link at the state convention. It was good seeing everybody and I hope the presentation was useful. A few people asked if the slides would be available for viewing on the website. Read more…


The Minneapolis WiRES-X node on 444.850 has been setup to require Digital Squelch Code 001 for access. If you’re using WiRES-X mode on your radio, it will automatically setup the proper squelch code. If you are operating in normal digital Read more…